Freud SD206C16 6" Diameter x 1/16" Thick x 2T Chipper Carbide-Tipped Saw Blade with 5/8" Arbor for Freud SD206 Dado Set

Freud dado sets are built to last through many years of sharpening and use.accidents like dropping a chipper do happen and Freud offers a full range of replacement parts.outside blades and chippers are made to the same exacting standards or quality as the original set.wider cuts Freud's Precision Shim Set and additional chippers are available. Application: Use on all table saws and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood.


saw blade Wikipedia

Freud LU84M008 8-Inch 40 Tooth ATBF Combination Saw Blade with 5/8-Inch Arbor

The LU84M series of saw blades are classic combination design with Freud quality and ingenuity. These industrial saw blades are produced with extreme precision using lasers to cut the hardened blade bodies and tensioning machines to insure the blades stay


saw blade Wikipedia

Forrest CM06H406100 Chopmaster 6-1/2-Inch 40 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low melt nylons. Specially engineered side clearances on the carbide teeth significantly reduced and in many cases, totally eliminate any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with DOUBLE-HARD and 40% stronger #C4 Carbide. 50% to 300% Longer Life Between Sharpenings, Reduced Yearly Sharpening Costs, Less Machine Downtime, Improved Labor Efficiency, Inventory Savings -- Fewer Blades Required.


saw blade Wikipedia

Forrest NM128011145 No Melt 12-Inch 80 Tooth 1-Inch Arbor 9/64-Inch Kerf Plastic Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2" thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10" diameters and smaller.


saw blade Wikipedia

Forrest WW09607100 Woodworker I 9-Inch 60 Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2" thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10" diameters and smaller.


saw blade Wikipedia

Freud BL71MLA9 30-Millimeter to 5/8-Inch Saw Blade Bushing

Freud's bushings are manufactured to the highest precision to insure a cut equal to that of the cutter without the bushing.


saw blade Wikipedia

Forrest CP30609125 Solid Surface Material 300mm 60 Tooth 30mm Arbor 1/8-Inch Kerf Radial & Miter Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.


saw blade Wikipedia

Freud LM72M014 14-Inch 30 Tooth FTG Ripping Saw Blade with 1-Inch Arbor

Freud's LM72M Industrial Rip blades are the industry standard for glue line ripping of hard and soft woods from 3/4 to 2-3/4 inches thick. Featuring extra rigid blade bodies and flat top micrograin carbide teeth, these blades give the straightest, smoothe


saw blade Wikipedia

Freud Diablo D0848F 8" x 48-Tooth Steel Demon TCG Ferrous Cutting Circular Saw Blade 5/8" Arbor

Steel Demon. Ideal for cutting steel studs, steel pipe, and steel sheet. For most mild steels under 1/8". Triple Chip Design for longer cutting life in metal. Perma-Shield coating shields blade against heat, gumming, and corrosion. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth.Features Freud's TiCo Hi-Density Carbide. Cuts up to 40x longer than abrasive discs. 8" diameter, 48t TCG, 5/8" arbor.
Customer Review: Freud Diablo Ferrous Metal Cutting Blade
I have used a Freud non-ferrous metal cutting blade for a number of years and have been very happy with it. I have cut pieces of aluminum stock up to 1/4" with good results. Unfortunately, I can't say the same about the ferrous metal blade. As soon as I made one or two short cuts in a sheet of .030" mild steel on my table saw, the blade became dull. Further cuts were difficult and resulted in considerable burring. I reported the problem to Freud and they gave me a return authorization. The replacement blade behaved the same way. Based on my experience, I can't recommend the blade.
Customer Review: Steel demon blade
Used to cut steel tube (.065 wall), in a miter saw. Worked well in this application, especially when brand new and sharp. After about 10 cuts the quality of cut was noticeably worse, but still acceptable. Blade performance seemed constant after that, for many more cuts.


saw blade Wikipedia

Forrest DH121007145 Duraline HI-A/T 12-Inch 100 Tooth 1-Inch Arbor .145-Inch Kerf Melimine & Plywood Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Miter Master blades work with all makes of double or single miter saws. These professional quality miter saw blades produce tight, perfectly cut miter joints with no bottom splinters. These saw blades are specially designed to cut extruded profiles, bars, and plate stock.


saw blade Wikipedia

Freud LU77M008 8" Diameter x 64T TCG Thin Kerf Non-Ferrous Metal Carbide-tipped Saw Blade with 5/8" Arbor (.083 Kerf)

Industrial Thin Kerf Non-Ferrous Metal Blade TCG 8"x58t 5/8"arbor. Long life and burr-free cuts in 1/4" max. thick non-ferrous materials.


saw blade Wikipedia

Freud D0620X Diablo 6-Inch 20 Tooth ATB Trim Saw Blade with 1/2-Inch Arbor

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This trim saw blade is proven to extend run time on Porter Cable, Saw Boss , and similar trim saws.
Customer Review: great cutter
This blade cuts great with my porter cable 19 volt cordless saw. I think its probably the best blade I've used with it
Customer Review: Good blade
My saw is a Porter Cable Saw Boss. It's a great saw, but the 6-inch blades are hard to find. It's good that Freud sees fit to make them. The cutting ability of my saw was improved with the new blade, even though the blade on the saw already was still very sharp. I like Freud blades, and use them on my table saw, too.


saw blade Wikipedia

freud p408 8" Diameter x 34T Hi-ATB Combination Carbide-Tipped Saw Blade with 5/8" Arbor (.126" Kerf)

Crosscuts & Rips in solid Woods, Veneers, & MelamineFeatures Freud's TiCo hi-density carbide with titanium for long life and a flawless finishSpecial double-side grind combined with Hi-ATB permits this blade to do it allFlawless melamine and veneer cuts on top and bottomGlue line rip and burnished scratch free cross cuts in hard and soft woodPerma-shield coating to resist heat; limited lifetime warranty


saw blade Wikipedia

Freud BL71MBC9 13/16-Inch to 1/2-Inch Saw Blade Bushing

Freud's bushings are manufactured to the highest precision to insure a cut equal to that of the cutter without the bushing.


saw blade Wikipedia

Freud LU91R010 10'' x 60T Thin Kerf Sliding Compound Miter Saw Blade

A must for underpowered saws, thin kerf blades remove less material, which means you'll get reduced waste and less power drain on your saw. With a -5 degree hook angle and application specific micrograin carbide, this blade will dramatically improve the performance of your sliding compound miter saw.


Specifications:
Freud Model: LU91R010
Diameter: 10"
Teeth: 60 ATB
Hook Angle: -5 degrees
Arbor: 5/8"
Kerf: .090"

Features:
Application-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.
Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.
Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.
Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.
Precision-tensioned blade bodies made of high strength steel (4045 Rc) stay flat and true throughout years of service.
Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.


saw blade Wikipedia

Freud TK006 Avanti 6" 20 Tooth ATB 1/2" Arbor Thin Kerf Circular Saw Blade

This small trim blade is designed to meet the specifications of the Porter Cable Saw Boss, and other similar trim saws while being manufactured to Freud's high tool standards. This blade features Freud's Tico High Density Carbide that is the perfect mixture of cobalt, tungsten, and titanium designed to maximize cutting life. The Silver ICE Coating , an industry first protective coating, shields the blade from extreme heat, resin or pitch build-up, and corrosion up to 2 times longer than standard polished blades. Heat expansion slots help the blade from expanding during friction causing operations. The anti-kickback design reduces the effects of kickback associated with overfeeding. 6 inch diameter, 20t ATB, 1/2 inch arbor.


saw blade Wikipedia

Freud Inc D1040A Diablo Carbide Tipped Circular Saw Blade

Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold the


saw blade Wikipedia

Forrest CP30609125 Solid Surface Material 300mm 60 Tooth 30mm Arbor 1/8-Inch Kerf Radial & Miter Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.


saw blade Wikipedia

Freud LU98R012 12-Inch 96 Tooth TCG Laminate and Wood Cutting Saw Blade with 1-Inch Arbor and PermaShield Coating

Superior laminate/wood blade. The all new LU98R blade with hook carbides is far supperior for cutting laminates, melamines(tm), soft and hard woods. 12 in. 96 TCG 1 in.


saw blade Wikipedia

Freud SC-002 3-1/2-Inch Blade Stabilizer with 1-Inch Arbor for 7-Inch Saws or Larger

Even the best blades on the best table saws wobble to some extent, yielding imprecise cuts or unsightly kerf marks on the edge of a board. A good blade stabilizer like this Freud model can make the difference between common woodworking and fine woodworking. Freud's blade stabilizer has excellent balance and more weight than competing models, and, when used with a good blade, it produces excellent results every time. While the stabilizer is great for ensuring accurate rips in thin stock, as well as perfect dados and rabbets, you may need to remove it when working with thicker stock because the size of the stabilizer can prevent the blade from raising to its full height and keep the saw from reaching its maximum tilt. Freud's blade stabilizer is as good as they come, though, and definitely a worthwhile investment for any woodworker looking for the finest results. Fits saws with a 1-inch arbor. --Brian Trinen


saw blade Wikipedia