Freud SD206C16 6" Diameter x 1/16" Thick x 2T Chipper Carbide-Tipped Saw Blade with 5/8" Arbor for Freud SD206 Dado Set

Freud dado sets are built to last through many years of sharpening and use.accidents like dropping a chipper do happen and Freud offers a full range of replacement parts.outside blades and chippers are made to the same exacting standards or quality as the original set.wider cuts Freud's Precision Shim Set and additional chippers are available. Application: Use on all table saws and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood.


saw blade Wikipedia

Freud LU84M008 8-Inch 40 Tooth ATBF Combination Saw Blade with 5/8-Inch Arbor

The LU84M series of saw blades are classic combination design with Freud quality and ingenuity. These industrial saw blades are produced with extreme precision using lasers to cut the hardened blade bodies and tensioning machines to insure the blades stay


saw blade Wikipedia

Forrest CM06H406100 Chopmaster 6-1/2-Inch 40 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low melt nylons. Specially engineered side clearances on the carbide teeth significantly reduced and in many cases, totally eliminate any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with DOUBLE-HARD and 40% stronger #C4 Carbide. 50% to 300% Longer Life Between Sharpenings, Reduced Yearly Sharpening Costs, Less Machine Downtime, Improved Labor Efficiency, Inventory Savings -- Fewer Blades Required.


saw blade Wikipedia

Forrest NM128011145 No Melt 12-Inch 80 Tooth 1-Inch Arbor 9/64-Inch Kerf Plastic Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2" thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10" diameters and smaller.


saw blade Wikipedia

Forrest WW09607100 Woodworker I 9-Inch 60 Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2" thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10" diameters and smaller.


saw blade Wikipedia

Freud BL71MLA9 30-Millimeter to 5/8-Inch Saw Blade Bushing

Freud's bushings are manufactured to the highest precision to insure a cut equal to that of the cutter without the bushing.


saw blade Wikipedia

Forrest CP30609125 Solid Surface Material 300mm 60 Tooth 30mm Arbor 1/8-Inch Kerf Radial & Miter Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.


saw blade Wikipedia